Structural support and non-structural plywood F22 standards for the Australian market

Structural Bracing and Non-structural Plywood F22 Standard for Australia MarketFace/back: 0.9mm red/yellow hardwood veneerCore: orginal whole hardwood veneerStandard: AS/NZS2269, F22Glue: Dynea phenolic resin, "A" bond glue linesThickness: 4mm 3 layers size: 2440x900mm, 2440x1200mm, 2745x1200mm,2745x900mm,3050x120

Featured Products

Structural Bracing and Non-Structural Plywood F22 Standard for Australia Market
Structural Bracing and Non-structural Plywood F22 Standard for Australia Market
Structural Bracing and Non-Structural Plywood F22 Standard for Australia Market

Face/back: 0.9mm red/yellow hardwood veneer
Core: orginal whole hardwood veneer
Standard: AS/NZS2269, F22
Glue: Dynea phenolic resin, "A" bond glue lines
Thickness: 4mm 3 layers 
size: 2440x900mm, 2440x1200mm, 2745x1200mm,2745x900mm,3050x1200mm,3050x900mm
Color: red or yellow natural timber color
Application: Structural bracing and Non-structural 
Packing: 150pcs/pallet

Uncoated high appearance surface suitable for clear, stain and paint finishes
Contains a second void-free layer under surface veneer increasing protection from moisture bubbles and high point loads

HC Wood Structural Plywood has been manufactured at our plant in China, for in excess of 15 years and has been used successfully in the Asia, Australia and New Zealand. For domestic and light commercial structural and decorative applications HC wood manufactures structural plywood in a range of widths, lengths, thickness and grades to AS/NZS2269 from Newzealand and Russia soured plantation Radiata Pine and Larch. 

Structural plywood is for use in all permanent structural and engineered applications.

A Bond is durable and permanent under conditions of full weather exposure and long term stress.

Structural plywood should be preservative treated to ensure it lasts its full service life as it is manufactured from a range of hardwood and softwood timber species.

For termite and rot resistance, plywood can be treated to H2, H3 or H4 standards. Or for a lower cost alternative can be manufactured with a bifenthrin glue line additive which provides termite resistance but is only suitable for use south of the tropic of Capricorn.

Structural Bracing and Non-Structural Plywood F22 Standard for Australia Market
Structural Bracing and Non-Structural Plywood F22 Standard for Australia Market

HC Structural Plywood Save Cost

HC structural plywood can be disassembled and used repeatedly for both faces, saving 25% of the cost.

    - Be special for quality surface veneer
    - Optimization for the special grade of core
    - Be special for adhesive

Structural Bracing and Non-Structural Plywood F22 Standard for Australia Market
Meanwhile we also can supply you the formwork system accessories, scaffolding plank, formwork beams etc. We specially professional in supplying film faced plywood 18mm shuttering panel with huge quantity every month to USA market, Russian market, central Asian market regularly every month.
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours